"Gamestri Sejahtera" is a national company in Indonesia engaged in the Gas Service, Trading and Industrial Supplier. Our products include: Pig Caliper, Intelligent Pig / MFL, Bi-Pig, Foam Pig, Flanges, Flanged Fittings, Threaded Flange, Plate Flange.
1.Materials:
Carbon Steel:ASTM A105,ASTM A350 LF1,LF2,LF3,A36,ASTM A234 WPB,etc
Stainless Steel:ASTM A182 F304/304L, 316/316L,316Ti,321,317L,310S,etc
Alloy Steel:A182 F1,F5,F9,F11,F12,22,F22,F91,etc
Duplex Stainless Steel: S31803(SAF2205),S32750(SAF2507),S31500(3RE60)
2:Standards:ANSI/ASME B16.5,B16.36,B16.47,AWWA C207,DIN,BS,SABS/SANS,MSS SP44,ISO,API Flange,etc
Dimensions & Masses of ANSI B16.5 Plate Flange Class 150/300/600
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
NOTE:
1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
For detial dimensions and catalogue of Reducing Flanges please contact with us now
Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com
