Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:
- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance
Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.
For detial dimensions and catalogue please contact with us now
Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com
