Stem Trap SC,SF Miyawaki

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Sv Miyawaki

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance
Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap With Fleng SV

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap SL Miyawaki

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Miyawaki SU2N

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap SU2H Thermodynamic

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Thermodynamic Stem Trap SD1

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap S55H Miyawaki

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Miyawaki Steam Trap S61N

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.
Types
S31N: Ductile Cast Iron Steam Traps with replaceable internals
SC,SF: Cast Iron Steam Traps for high capacity
SC31: Stainless Steel Steam Traps with replaceable internals
SD1, SU2N, SU2H: Stainless Steel Steam Traps for low to high pressure applications
S55N, S61N, S62N: Forged Steel Steam Traps for high pressure applications
SV: Steam Traps with inbuilt bypass
SL3: Compact, very small trap for low capacity applications

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Radiator Trap W1 Miyawaki

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Miyawaki W2

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Inverted Bucket Trap – Low Pressure / Large Capacity Miyawaki Seri ER

Inverted Bucket Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. MIYAWAKI offers a very wide range of inverted bucket steam traps for small up to large condensate loads. Inverted bucket steam traps discharge the condensate intermittently.

Types
ES: Cast Iron Inverted Bucket Steam Traps for small up to medium condensate loads
ESU: Stainless Steel Inverted Bucket Steam Traps for small up to medium condensate loads
ER: Cast Iron Inverted Bucket Steam Traps for medium up to high condensate loads
ESH, ER25: Cast Steel Inverted Bucket Steam Traps for high pressure and small up to high condensate loads.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Steam Trap Miyawaki seri ER25

Inverted Bucket Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. MIYAWAKI offers a very wide range of inverted bucket steam traps for small up to large condensate loads. Inverted bucket steam traps discharge the condensate intermittently.

Types
ES: Cast Iron Inverted Bucket Steam Traps for small up to medium condensate loads
ESU: Stainless Steel Inverted Bucket Steam Traps for small up to medium condensate loads
ER: Cast Iron Inverted Bucket Steam Traps for medium up to high condensate loads
ESH, ER25: Cast Steel Inverted Bucket Steam Traps for high pressure and small up to high condensate loads.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Inverted Bucket Trap – Low Pressure Es Stem trap

Inverted Bucket Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. MIYAWAKI offers a very wide range of inverted bucket steam traps for small up to large condensate loads. Inverted bucket steam traps discharge the condensate intermittently.

Types
ES: Cast Iron Inverted Bucket Steam Traps for small up to medium condensate loads
ESU: Stainless Steel Inverted Bucket Steam Traps for small up to medium condensate loads
ER: Cast Iron Inverted Bucket Steam Traps for medium up to high condensate loads
ESH, ER25: Cast Steel Inverted Bucket Steam Traps for high pressure and small up to high condensate loads.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Inverted Bucket Trap – Low Pressure Stem Trap Miyawaki

Inverted Bucket Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. MIYAWAKI offers a very wide range of inverted bucket steam traps for small up to large condensate loads. Inverted bucket steam traps discharge the condensate intermittently.

Types
ES: Cast Iron Inverted Bucket Steam Traps for small up to medium condensate loads
ESU: Stainless Steel Inverted Bucket Steam Traps for small up to medium condensate loads
ER: Cast Iron Inverted Bucket Steam Traps for medium up to high condensate loads
ESH, ER25: Cast Steel Inverted Bucket Steam Traps for high pressure and small up to high condensate loads.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Ball Float Miyawaki Seri G20

Ball Float Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. A ball float is connected with a lever to the valve and seat. Condensate will be discharged once it reaches a certain level inside the trap. Condensate is discharged continuously.
Types
G11N & G12N: Cast Iron Steam Traps for small and medium condensate loads
G15N: Cast Iron Steam Trap for low pressure and large condensate loads
G3N-G5, G2-G8: Cast Iron Steam Traps for large condensate loads
G20: Ductile Cast Iron Steam Trap for medium condensate loads
GH3N-GH5,GH2-GH8, GH50: Cast Steel Steam Traps for large condensate loads
GH40, GTH12: Cast Steel Steam Traps for medium condensate loads
GC1, GC1V: Stainless Steel Steam Traps for small condensate loads
GC20: Stainless Steel Steam Trap for medium condensate loads
Features
- All traps are equipped with stainless steel wear and corrosion resistant float, lever, valve and seat systems for a long and problem free operation.
- Each ball float steam trap is equipped with an air vent for venting air and gases at the time of start-up and during operation.
- The large capacity steam traps like G2-G8,GH2-GH8 use a double ported balance valve system, which is small in its physical size compared with the very high capacity of the traps.
- All traps are designed for quick and easy maintenance.
- Available options: Lock release valve for G11N and G12N

Application Ball Float Steam Traps can be used in all process applications, like all kind of heat exchangers, tank and unit heaters and others, where condensate must be removed immediately after it forms. The type GC1 is especially designed for applications in the food, pharmaceutical and other industries with small condensate loads and the need for stainless steel bodies. It can be also installed for drainage of steam main lines.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Miyawaki G12N

Ball Float Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. A ball float is connected with a lever to the valve and seat. Condensate will be discharged once it reaches a certain level inside the trap. Condensate is discharged continuously.
Types
G11N & G12N: Cast Iron Steam Traps for small and medium condensate loads
G15N: Cast Iron Steam Trap for low pressure and large condensate loads
G3N-G5, G2-G8: Cast Iron Steam Traps for large condensate loads
G20: Ductile Cast Iron Steam Trap for medium condensate loads
GH3N-GH5,GH2-GH8, GH50: Cast Steel Steam Traps for large condensate loads
GH40, GTH12: Cast Steel Steam Traps for medium condensate loads
GC1, GC1V: Stainless Steel Steam Traps for small condensate loads
GC20: Stainless Steel Steam Trap for medium condensate loads
Features
- All traps are equipped with stainless steel wear and corrosion resistant float, lever, valve and seat systems for a long and problem free operation.
- Each ball float steam trap is equipped with an air vent for venting air and gases at the time of start-up and during operation.
- The large capacity steam traps like G2-G8,GH2-GH8 use a double ported balance valve system, which is small in its physical size compared with the very high capacity of the traps.
- All traps are designed for quick and easy maintenance.
- Available options: Lock release valve for G11N and G12N

Application Ball Float Steam Traps can be used in all process applications, like all kind of heat exchangers, tank and unit heaters and others, where condensate must be removed immediately after it forms. The type GC1 is especially designed for applications in the food, pharmaceutical and other industries with small condensate loads and the need for stainless steel bodies. It can be also installed for drainage of steam main lines.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap Ball Float Miyawaki G15N

Ball Float Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. A ball float is connected with a lever to the valve and seat. Condensate will be discharged once it reaches a certain level inside the trap. Condensate is discharged continuously.
Types
G11N & G12N: Cast Iron Steam Traps for small and medium condensate loads
G15N: Cast Iron Steam Trap for low pressure and large condensate loads
G3N-G5, G2-G8: Cast Iron Steam Traps for large condensate loads
G20: Ductile Cast Iron Steam Trap for medium condensate loads
GH3N-GH5,GH2-GH8, GH50: Cast Steel Steam Traps for large condensate loads
GH40, GTH12: Cast Steel Steam Traps for medium condensate loads
GC1, GC1V: Stainless Steel Steam Traps for small condensate loads
GC20: Stainless Steel Steam Trap for medium condensate loads
Features
- All traps are equipped with stainless steel wear and corrosion resistant float, lever, valve and seat systems for a long and problem free operation.
- Each ball float steam trap is equipped with an air vent for venting air and gases at the time of start-up and during operation.
- The large capacity steam traps like G2-G8,GH2-GH8 use a double ported balance valve system, which is small in its physical size compared with the very high capacity of the traps.
- All traps are designed for quick and easy maintenance.
- Available options: Lock release valve for G11N and G12N

Application Ball Float Steam Traps can be used in all process applications, like all kind of heat exchangers, tank and unit heaters and others, where condensate must be removed immediately after it forms. The type GC1 is especially designed for applications in the food, pharmaceutical and other industries with small condensate loads and the need for stainless steel bodies. It can be also installed for drainage of steam main lines.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Flanged Connection Ball Steam Trap G20

Ball Float Steam Traps belong to the family of mechanical traps. They operate on the difference in density between steam and water. A ball float is connected with a lever to the valve and seat. Condensate will be discharged once it reaches a certain level inside the trap. Condensate is discharged continuously.
Types
G11N & G12N: Cast Iron Steam Traps for small and medium condensate loads
G15N: Cast Iron Steam Trap for low pressure and large condensate loads
G3N-G5, G2-G8: Cast Iron Steam Traps for large condensate loads
G20: Ductile Cast Iron Steam Trap for medium condensate loads
GH3N-GH5,GH2-GH8, GH50: Cast Steel Steam Traps for large condensate loads
GH40, GTH12: Cast Steel Steam Traps for medium condensate loads
GC1, GC1V: Stainless Steel Steam Traps for small condensate loads
GC20: Stainless Steel Steam Trap for medium condensate loads
Features
- All traps are equipped with stainless steel wear and corrosion resistant float, lever, valve and seat systems for a long and problem free operation.
- Each ball float steam trap is equipped with an air vent for venting air and gases at the time of start-up and during operation.
- The large capacity steam traps like G2-G8,GH2-GH8 use a double ported balance valve system, which is small in its physical size compared with the very high capacity of the traps.
- All traps are designed for quick and easy maintenance.
- Available options: Lock release valve for G11N and G12N

Application Ball Float Steam Traps can be used in all process applications, like all kind of heat exchangers, tank and unit heaters and others, where condensate must be removed immediately after it forms. The type GC1 is especially designed for applications in the food, pharmaceutical and other industries with small condensate loads and the need for stainless steel bodies. It can be also installed for drainage of steam main lines.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »

Stem Trap SC31 Miyawaki

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate
near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently. All steam traps are equipped with a hardened stainless steel disc and seat. After the lapping process all disc surfaces are controlled individually before releasing them for use in steam traps. These features and very high and severe quality standards for the whole production process give MIYAWAKI‘s thermodynamic steam traps a long and reliable service life. Types S31N Ductile Cast Iron Steam Traps with replaceable internals SC,SF Cast Iron Steam Traps for high capacity SC31 Stainless Steel Steam Traps with replaceable internals SD1, SU2N, SU2H Stainless Steel Steam Traps for low to high pressure applications S55N, S61N, S62N Forged Steel Steam Traps for high pressure applications SV Steam Traps with inbuilt bypass SL3 Compact, very small trap for low capacity applications Features - Immediate discharge of condensate:

- Insensitive to waterhammer, superheated steam and freezing
- Most types contain a bimetal ring which improves the ability of the trap to discharge air
and cold condensate quickly at start-up and prevents air locking during times of operation
- Can be installed in any position
- In case of danger of air locking special discs available
- All traps equipped with additional cover for reduced frequency of cycling and energy savings
- All traps with inbuilt strainers (except SL3)
- Easy maintenance

Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharmaceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

For detial dimensions and catalogue please contact with us now

Hp : +6285643260296
Email : gamestri.sejahtera@gmail.com

Read more »